The safer solution is here…

Our B28 Touch Free Bottled Water Cooler has the latest technology in hygienically dispensing chilled water.
It’s the hydration experience we’ve all been waiting for!

SENSOR: Simply wave your hand above the sensor to change temperature (hot, cold or ambient), then hold your hand over the sensor to dispense the required amount of water.

COLD TANK: 4L, 304 stainless steel for superior chilling. The highly polished surface is hygienic and easy to clean.

HOT TANK: 1.8L, 304 stainless steel with 500watt sheathed heater to ensure temperature control. Easy access on/off switch on the back of the unit.

CABINET: Available in Gloss Black or White. Front panels are moulded UV treated ABS. Side panels are zinc coated steel covered in polymer polyester resin.

TAP: The outside of the chrome look water outlet is made from ABS plastic, the inside is durable NSF

3 year warranty.

Hot Water: 7L per hour. (approx 84-89 degrees)

Cool Water: 3.2L per hour (approx 4-9 degrees)

Ambient Water: 3.2L per hour (room temperature)

*Intermittent use only, continuous use will result in reduced performance.

REFRIGERATION: Gas R134A. The refrigerant flow is controlled by a capillary tube which has no moving parts. The compressor is hermetically sealed with an automatic overload protector. Lubricant is not needed.

ELECTRICAL: Certificate number 160793. 220v 50hz single phase. A 1.5 metre power cord is supplied. Full load current is 1.2 amps.

CONDENSER: Low decibel, air cooled static type with no moving parts.

• Waterworks AquaNet filter:

Remove the spike and replace with a scuff ring (SR5) to provide a base for the Waterworks™ Aquanet® filter (AN2) and the water bottle.

• Ask us about the Waterworks non-splash valve, it is ideal for this set up.